September 9, 2026

On a shared site, health and safety duties overlap rather than transfer, and no contract can sign them away. What the Act asks of every PCBU, how duties divide with labour hire workers, and what changes on 1 April 2027.

Understanding the Health and Safety at Work Act on a Shared Site

There is a belief that persists on busy sites, and it causes real problems: that if a worker belongs to someone else, their safety belongs to someone else too. It does not. Under the Health and Safety at Work Act 2015, duties overlap rather than transfer, and both businesses carry them at once.

For anyone running a site where contractors, subcontractors and labour hire workers come and go, this is the single most important thing to understand. It is also the thing most commonly misread in contracts.

The basic structure of the Act

The Act puts the primary duty of care on the PCBU, the person conducting a business or undertaking. Each PCBU must ensure, so far as is reasonably practicable, the health and safety of its workers and of anyone else affected by its work.

Two features matter particularly on shared sites.

The duty follows influence, not employment. Your obligations extend to workers you influence or direct, not only those on your payroll. A labour hire worker inducted onto your site, working under your supervision, using your plant, is a worker you influence.

Duties cannot be contracted out of. You can agree who is best placed to control a given risk. You cannot sign away the duty itself. WorkSafe is explicit on this point, and it will take enforcement action against more than one PCBU where a shared failure is found.

What overlapping duties actually require

Where two or more PCBUs hold a duty on the same matter, the Act requires them to consult, cooperate and coordinate with each other so far as is reasonably practicable. WorkSafe treats this as an active obligation rather than a box to tick.

In practice it expects PCBUs to:

  • identify the risks that need managing
  • plan each stage of the work
  • consider how their work affects other PCBUs and the public
  • agree which PCBU is best placed to control each risk
  • set clear roles and responsibilities, and communicate them
  • monitor the arrangements proportionately to confirm they are working

Reasonable arrangements between businesses are allowed. What is not allowed is pushing risk down the contracting chain. WorkSafe expects those at the top of a chain to lead on good practice, which means choosing competent contractors, sharing information properly, planning and monitoring, and reviewing afterwards.

How this plays out with labour hire workers

When we supply workers to a client site, the duties divide along the lines of who can actually control what.

What sits with us as the employer: verifying competency and certification, confirming the worker is fit for the role, providing general health and safety training, carrying the employment relationship, monitoring wellbeing, and satisfying ourselves that the site we are sending people to is being run properly.

What sits with the host business: site-specific induction, hazard and risk information for that site, supervision, safe systems of work, plant and equipment, emergency procedures, and welfare facilities.

What sits with both: talking to each other. If a near miss happens, if a worker's role changes, if a new hazard appears, both parties need to know.

The practical test is simple. Nobody at an inspection will accept "they were an agency worker" as an answer. We have set this out in more depth in how labour hire agencies ensure health and safety compliance on site.

Changes coming on 1 April 2027

The Health and Safety at Work Amendment Act 2026 received Royal assent on 9 July 2026. The approved code of practice provisions took effect the following day, and the remainder is set to commence on 1 April 2027. It is worth understanding now, because it changes where effort is expected to go.

A focus on critical risks

The Act's purpose shifts towards managing critical risks rather than simply identifying every risk. A critical risk is one that, if it occurs, is likely to cause a death, a notifiable injury, illness or incident, or an occupational disease listed in the Accident Compensation Act 2001. Seriousness of harm drives the definition, not likelihood. A new Schedule 1A lists specific hazards associated with critical risks.

Larger PCBUs must still manage all risks, but must prioritise critical ones when allocating time, money and attention.

A distinct category for small PCBUs

A small PCBU is one where fewer than 20 workers carry out work in any capacity. Where the workforce fluctuates, the test is whether the business reasonably expects fewer than 20 workers for at least nine months of the financial year. Small PCBUs must focus on critical risks and provide basic welfare facilities.

On a shared site with a large PCBU, a small PCBU must work with them on critical risks, and may be required to do so for lower-level risks too.

Safe harbour through codes of practice

A PCBU that follows the relevant actions in an approved code of practice will be treated as having met its duty. This applies to codes approved from 1 April 2027, and to the existing forestry and harvesting code and the port and ship cargo code. Industry groups, unions and employer organisations can now draft codes for the regulator to review.

Clearer officer duties

The Act separates governance from operational responsibility. An officer's due diligence duty attaches to their governance role, and the definition of due diligence has been clarified, including the requirement to keep health and safety knowledge up to date.

What we would do now

  • Identify your critical risks and check them against Schedule 1A.
  • Confirm your worker numbers, including contractors and labour hire workers, to know which category you fall into.
  • Map who shares your sites and whether they are large or small PCBUs.
  • Write down your consult, cooperate and coordinate arrangements. If you cannot show them, you cannot evidence them.
  • Induct every worker the same way, regardless of who employs them.
  • Check which approved codes of practice apply to your industry.

Commencement timetables can move, so confirm the current position with WorkSafe before relying on any date.

Key takeaways

On a shared site, duties overlap and cannot be transferred by contract. Both the host business and the labour hire employer hold obligations to the same worker, and both are expected to consult, cooperate and coordinate. From 1 April 2027 the emphasis shifts towards critical risks, with a distinct and lighter set of expectations for businesses under 20 workers.

If you would like to understand exactly how we divide these duties with our clients, our labour hire recruitment solutions page explains how we work, and our client FAQs answer the questions we get asked most. For construction specifically, our construction recruitment team deals with these arrangements daily.

This is general information, not legal advice.

‍

Share this post

Read More Posts